Purity of nature
guaranteed in our hands.
QUALITY CONTROL
Fenix applies most modern technology in the production of its 100% virgin plastic tanks .Updated technology with world standards enables the company to produce world –class water tanks. Well-equipped research and developed department and wide experience in the industry help the company to assure the quality of products. Since the company uses world-renowned 100% pure virgin food grade FDA approved material, your trust remains our commitment.
PULVERISATION
The 0.5cm long pellets are put into the pulverize and powdered to the requisite micron specification .the mill is set at controlled speed and temperature of 700C and monitored every 30min. a process sieve helps collect the powder. The black powder is used to make the outer layer and the white is used to make the inner layer
XTRUSION
Linear low density polythene is mixed with master batch in the specified proportion
Master batch –black
Master batch-white
Master batch –green
Master batch-blue
The extruder is set at temperature of 2000C.Plastic material and master batch are mixed in the specified proportion. Extruded with added carbon black ensures proper dispersion of carbon black throughout the material .as per IS 12071 the carbon content must be 2 or 3 % which is ideal to top penetration of UV rays in the sunlight through the tank .the Master batch is made into continuous ribbons which are cooled in running water and made into pellets which then go on to be pulverized or powdered.
PRODUCTION
The well-equipped laboratory and quality control system ensures that each product that comes from our industry reinforces our commitment, we put forward to you!
FEED TO MOULD
The well-equipped laboratory and quality control system ensures that each product that comes from our industry reinforces our commitment, we put forward to you!The stainless steel mould is fed with the pulverized powder according to the size of the mould and covered with lid
Moulds of various capacity tanks are made providing in a flat space on the top side of the tank in order to allow a person to stand on it, for cleaning and other maintenance work, which is mentioned in IS 12701 for cylindrical vertical water tanks. Moulds are made cylindrical shaped way flat bottom and a man hole is provided on the top side to allow a person to enter in it if necessary; maintaining height and diameter measurements within the permissible limit of the standard